Cannondale Scalpel Carbon 4 2024 Smoke XC Bike
10% of free accessories
Get 10% of free accessories when you
Excludes discounted bikes, ex-demo bikes and Cyclescheme.
We have done our best to sufficiently estimate demand. Please contact us if you have a question or wish to check availability.
Details
Available with Cannondale in the sizes shown above. Expect delivery within 3-4 working days of placing an order.
The thrill of speed. Winning XC and Marathon races. High-speed trail slaying.
Taking aim at XC race podiums and technical trails alike, the Scalpel 4 is always down for fast. It’s built on our advanced Series 1 carbon construction frameset, then set up with a Shimano Deore/XT 12-speed drivetrain, RockShox SID suspension both front and rear, and Stan’s NoTubes Crest S2 rims for reliable speed and control.
Specification
Frame | Scalpel, lightweight carbon construction, 120mm travel, Proportional Response Suspension and Geometry, FlexPivot Chainstay, full internal cable routing, 73mm BSA, 1.5” headtube with 1-1/8” upper reducer/internal cable guide, 148×12mm thru axle, 55mm chainline, UDH, post-mount disc – 160mm native |
Fork | RockShox SID, 120mm, Debonair, 15×110mm thru-axle, tapered steerer, 44mm offset |
Rear Shock | RockShox SIDLuxe Select+, 2-Pos mode adjust, adjustable rebound, 190×45 |
Rims | Stan’s NoTubes Crest S2, 32h, tubeless ready |
Hubs | (F) Shimano TC-500, 15×110mm thru-axle / ® Shimano MT410B, 12×148mm thru-axle |
Spokes | Stainless Steel, 14g |
Front Tyre | Maxxis Rekon Race WT, 29×2.4”, EXO Protection, tubeless ready |
Rear Tyre | Maxxis Aspen WT, 29×2.4”, EXO Protection, tubeless ready |
Pedals | Not included |
Crank | Shimano M5121, 32T |
Bottom Bracket | Shimano BSA 73mm |
Chain | Shimano Deore, 12-speed |
Rear Cassette | Shimano Deore, 10-51, 12-speed |
Rear Derailleur | Shimano XT |
Shifter | Shimano Deore 6100, 12-speed |
Handlebar | Cannondale 2 Flat, butted 2014 Alloy, 31.8mm, 3° rise, 8° sweep, 760mm |
Grips | Cannondale XC Silicone |
Stem | Cannondale C1 Conceal, Alloy, 31.8, -6° |
Headset | Acros ICR |
Brakes | Shimano MT501 hydraulic disc, 180/160mm RT54 rotors |
Saddle | Prologo Dimension NDR, STN rails |
Seatpost | Cannondale DownLow Dropper, internal routing, 31.6, 125mm (S), 150mm (M-XL) |
Connectivity | Cannondale Wheel Sensor |
Specifications are subject to change without notice
Size Guide
Frame Size | Minimum Height | Maximum Height |
Small | 154cm (5’1”) | 165cm (5’5”) |
Medium | 162cm (5’4”) | 175cm (5’9”) |
Large | 172cm (5’8”) | 182cm (6’0”) |
X Large | 180cm (5’11”) | 195cm (6’5”) |
We have developed our size guide from our selling experience and it may differ from the manufacturers guide. Please note, this is only a guide and if you have any concerns over sizing please get in contact
Geometry

Frame Size | Small | Medium | Large | X Large |
A – Seat Tube Length | 43.0cm | 44.0cm | 48.0cm | 52.0cm |
B – Top Tube Horizontal | 57.6m | 59.9cm | 62.2cm | 64.4cm |
C – Top Tube Actual | 53.1cm | 55.3cm | 57.7cm | 60.3cm |
D – Head Tube Angle | 68.0° | 68.0° | 68.0° | 68.0° |
E – Seat Tube Angle | N/A | N/A | N/A | N/A |
E’ – Seat Tube Angle Effective | 74.5° | 74.5° | 74.5° | 74.5° |
F – Standover | 74.3cm | 74.5cm | 74.5cm | 74.8cm |
G – Head Tube Length | 9.5cm | 10.5cm | 11.5cm | 12.5cm |
H – Wheelbase | 112.8cm | 115.1cm | 117.5cm | 119.9cm |
I – Front Center | 69.5cm | 71.8cm | 74.2cm | 76.6cm |
J – Chain Stay Length | 43.6cm | 43.6cm | 43.6cm | 43.6cm |
K – Bottom Bracket Drop | 4.0cm | 4.0cm | 4.0cm | 4.0cm |
L – Bottom Bracket Height | 34.1cm | 34.1cm | 34.1cm | 34.1cm |
M – Fork Rake | 5.5cm | 5.5cm | 5.5cm | 5.5cm |
N – Trail | 9.0cm | 9.0cm | 9.0cm | 9.0cm |
0 – Stack | 58.2cm | 59.1cm | 60.1cm | 61.0cm |
P – Reach | 41.5cm | 43.5cm | 45.5cm | 47.5cm |
Want to compare the size of your current bike to this one? Read our Reach and Stack guide here.
Manufacturer | Cannondale |
---|---|
RRP | No |